Mazzei venturi Injector have 5 Models from1/2 inch ports to 2 inch ports MPT

1. Mazzei Injector 1/2" - 2"ports MPT, 384X, 200 gph

1/2 inch MPT Mazzei injector model number 384X, 200 gph with 1/2 inch MPT intake and outlet. The suction end is a 1/4 inch tubing barb with 1/4 inch MNPT, end user chooses which to use.

2. Mazzei Injector 3/4 inch ports MPT, 584, 384 gph

3/4 inch MPT Mazzei injector model number 584, 384 gph with 3/4 inch MPT intake and outlet. The suction end is a 1/4 inch tubing barb with 1/4 inch MNPT, end user chooses which to use.

3. Mazzei Injector 1 inch ports MPT 1078-2, 1020 gph

1 inch MPT Mazzei injector model number 1078-2, 1020 gph with 1 inch MPT intake and outlet. The suction end is a 1/2 inch tubing barb with 1/2 in MNPT, end user chooses which to use.

4. Mazzei Injector 1 1/2 inch port MPT, 1585X, 2040 gph

1 1/2 inch MPT Mazzei injector model number 1585X, 2040 gph with 1 1/2 inch MPT intake and outlet. The suction end is a 1/2 inch tubing barb with 1/2 in MNPT, end user chooses which to use. .

5. Mazzei Injector 2 inch ports MPT, 2081, 6060 gph

2 inch MPT Mazzei injector model number 2081, 6060 gph with 2 inch MPT intake and outlet. The suction end is a 1 1/4 inch MNPT

Mazzei Injectors are high-efficiency, venturi-type, differential pressure injectors with internal mixing vanes. When a sufficient pressure difference exists between the inlet and outlet ports of the injector, a vacuum is created inside the injector body, which initiates suction of a liquid or gas through the suction port.

Mazzei Injectors are ideal for controlling the proper amount and distribution of additives for freshwater / saltwater fish tanks and aquariums

How a Mazzei Injector Works
When pressurized water enters the injector inlet, it is constricted toward the injection chamber and changes into a high-velocity jet stream. The increase in velocity through the injection chamber results in a decrease in pressure, thereby enabling an additive material to be drawn through the suction port and entrained into the water stream. As the jet stream is diffused toward the injector outlet, its velocity is reduced and it is reconverted into pressure energy (but at a pressure lower than injector inlet pressure).

Mazzei Injectors are extremely efficient. They operate over a wide range of pressures and require only a minimal pressure differential between the inlet and outlet sides to initiate a vacuum at the suction port.

Special Features
NEW INTERNAL VANES are positioned to maximize injector efficiency, suction capacity, and mixing capabilities
TROUBLE-FREE OPERATION with no moving parts
PROVEN PERFORMANCE with years of expected service
No electrical connections needed
Can run dry with no problems
Considerable cost savings versus other injection methods
Safe to use as the chemicals are under vacuum, not pressure
Constant injection of assures UNIFORM DISTRIBUTION OF MATERIAL

Specializing in

Ag Irrigation - Chemical Addition - Wastewater Aeration - Ozone Systems

Mazzei Injector Company manufactures high efficiency venturi-type patented Mazzei Injectors for injecting liquid or gas additives into water, Mixing Nozzles, and GDT Degassing Separators for removing gases from water. Our engineering staff can assist with product selection and application.